Hospital equipment neonatal phototherapy unit newborn baby incubator
Product Description
newborn baby incubator
Hospital Equipment neonatal phototherapy unit newborn baby incubator
Function features:
1. Microprocessor based servo controlled
2.Control mode :Air & Baby temperature,Humidity
3.Two skin probes for the measurement of central and peripheral temperature.
4.Baby weight,X-ray cassette,humidity control system.
5. Air temperature, skin temperature, humidity, timer and heat power separately displayed by LED
6. Alarms functions: Power failure; Over temperature; Temperature deviation; Temperature sensor failure; Fan failure;
7. Silence/reset button for alarms
8. >37 °Ctemperature setting, A keypad lock prevent inadvertent changes the setting
9. Trough for pulling and pushing, which is convenient to add water and wash
10. Fan with low noise and long life-span
11. Temperature deviation and over temperature could be amended in front panel directly
12. A second thermal cut-off function for more safety
13. Skin temperature sensor failure protect function avoid over temperature
14. The infant bed inclination angle is adjustable
15. Six operating windows, two sides operating windows can be swiveled
16. Heater is electrically cut-out if air temperature inside incubator exceed 40 °C
17. Cabinet with three drawers, silence castors
18. Large size and double wall hood
Standard configuration
Main body(including the double transparent hood, control system, infant bed, water trough), two skin temperature sensor, I.V.pole,tray ,Mattress, baby scale,drawers, slience luxurious castors
Optional parts:
Phototherapy up side unit;
Phototherapy from up and down sides;
RS232(485) connector;
Technical data:
1 Power Supply: ~ 220V, 50/60Hz
2 Power consumption: 650W
3 Operation environment conditions:
- An ambient Temperature: 20°C~ 30°C
- An ambient Humidity: 30% RH ~ 75% RH
- An ambient air pressure: 700 hPa ~1060 hPa
- An ambient air velocity less the 0.3m/s
4 Control temperature range:
- Air temperature : 25°C~37°C, 37.1°C~38°C
- Skin temperature : 32°C~37°C, 37.1°C~38.5°C
5 The warm-up time : 45 minutes
6 The function of alarm :
6.1 The over temp of air temp : 38°C (Heater is cut-out simultaneously, the thermal cut-out should be reset by manual)
6.2 The second thermal cut-out temperature: 40°C (Heater is cut-out simultaneously, the thermal cut-out should be reset by manual)
6.3 The alarm for deviation:
- Air temp: ±3.0°C (Heater is disconnected simultaneously at +3°C)
- Skin temp : ±1.0°C (Heater is disconnected simultaneously at +1°C)
6.4 Alarm for Sensors:
When the skin (or air) temperature sensor is shut off or short circuit,cut off the heater,give out alarm with sound and light .
6.5 Alarm for power failure
The power fails,give out alarm with sound and light.
6.6 Alarm for fan failure
The fan stops working or appear fault, give out alarm with sound and light and cut off the heater power.
6.7 Low water level
When the water level in trough is lower than rated level, low water level caution light is on.
7 Control humidity range:
30%~90%RH
8 Weighing scale
8.1 Weight range: 0.2~10Kg
8.2 Resolution: 1g
9 Transport and storage
Environment temperature: -10°C~+40°C
Relative humidity ≤80%RH
Atmospheric pressure range: 500hPa~1060hpa
10 Carbon dioxide (CO2) level within the constant temperature cover: less than 0.4% when a 4% mixture of CO2 in air is delivered at 750ml/min at a point 10 CM above the centre of the mattress through an 8 mm diameter tuber in vertical direction from the mattress to top.
11. Infant bed tilt angle: +-10degree
12. Mattress size: 67cm(L)X 54cm(W)
13. Trough capacity: 1200ml
14. Air filter: 0.5um
15.Baby scale range:10g-7kgs
Transport and storage
Environment Temp: -10--+70°C
Environment Relative Humidity: ≤ 80%RH
Atmospheric Pressure: 500~1060Hpa
Return to Home>>
Jiangsu Aegean Technology Co.,Ltd is a large-scaled multiple enterprise which consists of professional hospital furniture design, research, development, production, sales and service.
Our advantages for your business:
1)Consists of professional hospital funiture design ,research,development,production,sales and service
2)9 years experience of developing foreign market and have export to more than 150 countries
3) OEM for many famous brands from US for a long time
4) CE,ISO,SGS,FSC
5) AEGEAN with package sell service which with Hospital Bed&furniture production, Operating Equipment production and obstetric&Gynecology Equipment and trolly and machine
CE certificate ISO certificate
SGS certification Chamber of Commerce certification
1)Cartons and Wooden cases. It depends on your requirements
2)Trays available
3)15mm wood thickness
4)Professional shipping
5)Stock prepared if in case of need
Enterprise Vision
To be the best hospital furnitures supplier in the world!
Enterprise Idealism
Clients first, Staff second and Shareholders third
Jiangsu Aegean Technology Co.,ltd is a multiple company which consists of professtional hospital furnituredesign,research, production, sales and logistics business.
From 11th June 2009 till now, AEGEA medical furniture has been exported to more than 150 countries.We provide hospital furniture solution to the whole hospital project.
We serve the professional intermediaries from all countries. among them, we have been OEM for many famous brands from US for a long time
Enquiry us now to get our best offer!
Product Categories : Gynecology Equipment > Infant Incubator
